Hi, I using Window 10 and today [2016/04/16] got window last update, after update bitcomet announce me a ‘Disk Overload’ and always announce in right corner of PC, some task or all task was force stop [with x at status]
this problem is about bitcomet or window update?
[before update I never found this problem]
Thanks
How much ram memory does your computer have?
Are you using 32bit or 64bit version of bitcomet and windows?
How much ram memory does your computer have?
Are you using 32bit or 64bit version of bitcomet and windows?
RAM 8Gb
64bit OS and BitComet version
Try changing your bitcomet disc cache from the default 50mb to 500mb, Or try the settings I use on this computer…
Min disc cache 50
Max disc cache 1024
Shrink disc cache if free mem lower than 500
Cache size for HTTP 2048
This will use ram memory to store the commonly used data and reduce the disc read/writes and prevent overload. If the problem persists you may have to take a closer look at the disc, scan for errors, etc. If it[s a remote disc you might need larger cache settings.
This will lighten the load on your harddrive, but keep in mind that bitcomet will now use more ram memory.
Try changing your bitcomet disc cache from the default 50mb to 500mb, Or try the settings I use on this computer…
Min disc cache 50
Max disc cache 1024
Shrink disc cache if free mem lower than 500
Cache size for HTTP 2048
This will use ram memory to store the commonly used data and reduce the disc read/writes and prevent overload. If the problem persists you may have to take a closer look at the disc, scan for errors, etc. If it[s a remote disc you might need larger cache settings.
This will lighten the load on your harddrive, but keep in mind that bitcomet will now use more ram memory.
Yes, I do
but problem about disk overload still appears
After Disk Busy Notification
a Task is…
Task Manager show like this
You definitely don’t want 7777mb of max disc cache when you only have 8gb of ram, so I’d reduce that to half you ram (4096mb) or lower, and since you still have disc overload I suspect a disc problem. Scan any affected discs for errors and if they aren’t SSD drives it would be a good idea to defrag them too. If they are remote discs. like connected to a NAS device then they may be powering off to save power so you may need to work with the NAS settings to keep them active.
You can also try moving them to a different disc if the problem persists.
I’ve also seen cases where the path was too long which caused problems writing the data. In this case downloading them to the root of the drive will usually shorten the path, or in a folder with a short name. Different file systems have different limits to how long a path can be, and it only takes one file in the torrent to be too long before an error can stop the torrent.
I’d also recommend doing a manual hash check on the affected torrents before resuming.
Now I was reduce value follow your recommended
and problem is still appears
I must change Harddisk?
What did your harddrive scans show?
I was scan disk with properties and repair it, but problem is still appears
no error show on scan disk
Is this a local disc installed in your computer?
Now I install a new window with clean install
[backup format and install]
this problem are fixed
I think this problem appears about some free program include a malware / adware, that make my computer problem
If you say the problem happened after you applied the update, it might be Microsoft’s fault.
Can you check and see what fixes does the update contain?
I think he attributed it to a malicious freeware app, and unfortunately there are a lot of freeware apps that come bundled with malware, but great to hear this problem is fixed.
I think he attributed it to a malicious freeware app, and unfortunately there are a lot of freeware apps that come bundled with malware, but great to hear this problem is fixed.
So, he installed a malware app in exact same day the update has been applied?
So, he installed a malware app in exact same day the update has been applied?
Replied privately