fredman1948 Posted March 31, 2011 Share Posted March 31, 2011 As it says My comment tab was working fine but now I can see the number of comments in a tab but when I click on it I just get a blank screen, any ideas would be appreciated BT router BitComet 1.26 dsl Thanks Link to comment Share on other sites More sharing options...
The UnUsual Suspect Posted March 31, 2011 Share Posted March 31, 2011 The comments are hosted on our servers. Sometimes internet servers can be busy, or not functioning properly and need to be rebooted or repaired. This is unavoidable and all websites deal with it. The comments should work again soon, if not you can try restarting your computer, as the problem could even be on your end, or anywhere in between. Let us know if it doesn't work within a day or so and we'll alert development of the problem. Link to comment Share on other sites More sharing options...
fredman1948 Posted March 31, 2011 Author Share Posted March 31, 2011 Thanks for the reply I have been having this problem for three days now and have tried restarting even removed Bit-Comet and reinstalled but still no luck. I was just wondering if I had possibly disabled the comments in some way as I an definitely no expert lol I do think the comments tab is very useful and would like to get it back. Thanks Link to comment Share on other sites More sharing options...
The UnUsual Suspect Posted March 31, 2011 Share Posted March 31, 2011 "right click" on any one of the tabs and a list of checked and unchecked tabs will appear. Select which you want or don't want. Perhaps it's that simple. Link to comment Share on other sites More sharing options...
fredman1948 Posted April 1, 2011 Author Share Posted April 1, 2011 Thanks again tried that and the comments tab is selected I can see it and I can see the number of comments in the tab but when I click on it I just get a blank??? Thanks again Link to comment Share on other sites More sharing options...
Lucy26 Posted April 1, 2011 Share Posted April 1, 2011 Hi fredman, it takes a while for the comments to load, please give it some time and check the comments later. Link to comment Share on other sites More sharing options...
fredman1948 Posted April 1, 2011 Author Share Posted April 1, 2011 (edited) Been giving it a while Just a thought does it work with the new ie9 because when I think about it I have not got comments since I upgraded to it will try to roll it back Just done a system restore now I can get comments on some and non on others so not sure what to think of that all the ones I have tried are showing that there are comments in there but only some display them Edited April 1, 2011 by fredman1948 (see edit history) Link to comment Share on other sites More sharing options...
kluelos Posted April 1, 2011 Share Posted April 1, 2011 That is an unfortunate side effect of Internet Explorer -- one application affects settings for the whole system. You can probably adjust some setting in IE9 to make it all work again, but you'd have to find it by trial and error. Link to comment Share on other sites More sharing options...
markocapeta Posted April 21, 2011 Share Posted April 21, 2011 Link to comment Share on other sites More sharing options...
The UnUsual Suspect Posted April 21, 2011 Share Posted April 21, 2011 markocapita, are you using any type of IP filtering programs? Link to comment Share on other sites More sharing options...
markocapeta Posted April 21, 2011 Share Posted April 21, 2011 No I do not use IP filtering pr. . The problem appeared a few days ago, and until then it was all ok. even when Windows starts, Bit Comet will not start up automatically as before, but I have to manually start. even removed Bit-Comet and reinstalled but still no luck. but the important thing is to download movies is working properly. I'll wait a couple days, maybe the problem will resolve itself !!!!!!! Thanks ..... Link to comment Share on other sites More sharing options...
kluelos Posted April 21, 2011 Share Posted April 21, 2011 The problem is likely with IE's settings, not with BitComet. You'll need to look at what changed there. Link to comment Share on other sites More sharing options...
markocapeta Posted April 21, 2011 Share Posted April 21, 2011 I do not use IE, but I'm on Chrome or Comet bird. I have not touched any settings on them. Is it perhaps possible that, tune up utilities 2011 somting mest up? but this program I installed a 1 months ago and all is working ok, but the problems begin a few days ago., only program I have instaled the last few days is a mozilla fire fox 4!! Link to comment Share on other sites More sharing options...
The UnUsual Suspect Posted April 21, 2011 Share Posted April 21, 2011 You may not use IE to browse the internet, but since it IS used by windows, bitcomet MUST use it to display web content. The only way to avoid this would be for bitcomet to also include a web brower which would vastly over complicate it's development. Unfortunately changes to IE effect all programs that use it and Microsoft tends to not be concerned with keeping it 100% backwards compatible for 3rd party apps, so these types of problems have appeared. You are also correct in that this will have no effect on your downloading, only on your display of the comet ID pain and other web based content within bitcomet. Link to comment Share on other sites More sharing options...
markocapeta Posted April 21, 2011 Share Posted April 21, 2011 Ok. And Thank you very much for quick response and I hope to quickly solve the problem ,.......... Link to comment Share on other sites More sharing options...
zerojinn Posted April 22, 2011 Share Posted April 22, 2011 Hi Marko, we have related =inetcomm#what_to_do_when_garbled_text_appears_in_the_cometid_pane"]WIKI instructions on how to deal with garbled text appears in the CometID pane. What to do when garbled text appears in the CometID pane This problem is usually caused by the corruption of Outlook. You may also find that any .mht file can't be open by IE correctly. Please try Method 1 first, if the problem still exists, please then try method 2. Method 1: Step[1]: Windows Start menu → run → regsvr32 inetcomm.dll Step[2]: If last step failed due to missing inetcomm.dll, try to restore it from c:\windows\system32\dllcache\ to c:\windows\system32\ Step[3]: Repeat step[1], if still faild due to “module missing”, try to find msoert2.dll and inetres.dll, copy them to c:\windows\system32\ Step[4]: Repeat step[1], and it should work. Method 2: Download the mht file from HERE, extract it and double-click the file named mht.reg. Link to comment Share on other sites More sharing options...
markocapeta Posted April 22, 2011 Share Posted April 22, 2011 ok we succeeded to solve half the problem. I try Method 1 first, but the problem still exists, then I try method 2, and i succeeded to recover the log on box, but still remained comments, snapshoots, start page, and why not program starts along with windows? thanks .... Link to comment Share on other sites More sharing options...
markocapeta Posted April 22, 2011 Share Posted April 22, 2011 I manage to solve snapshoots and startup ,they are working fine, is only left comments and start page. When I click on the comments only appears white surface :rolleyes: Link to comment Share on other sites More sharing options...
The UnUsual Suspect Posted April 22, 2011 Share Posted April 22, 2011 have you selected a task before looking for comments/snapshots? Also try different tasks, not all will have any comments or snapshots. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now