OmarAsmal Posted November 6, 2014 Share Posted November 6, 2014 (edited) No Matter what i do tcp is always blocked. I created the rules for firewall,UPnP working. Router is a INTELLINET NETWORK SOLUTIONS Wireless 300N Broadband Router model 524490 Edited November 6, 2014 by OmarAsmal (see edit history) Link to comment Share on other sites More sharing options...
The UnUsual Suspect Posted November 7, 2014 Share Posted November 7, 2014 Your screenshot doesn't show the port as blocked, what evidence do you have that it's blocked? Link to comment Share on other sites More sharing options...
OmarAsmal Posted November 7, 2014 Author Share Posted November 7, 2014 Sorry about that. I did not notice here is the proper screen shot Link to comment Share on other sites More sharing options...
The UnUsual Suspect Posted November 7, 2014 Share Posted November 7, 2014 What is the status of your port check indicator, green, yellow or grey? Have you checked the port on canyouseeme.org? Link to comment Share on other sites More sharing options...
OmarAsmal Posted November 7, 2014 Author Share Posted November 7, 2014 The colour is yellow as it says blocked. I have and it says it can see me when i use port 80 but if i change the port to 13224 it says " Error: I could not see your service on 41.162.29.82 on port (13224) Reason: Connection refused " Link to comment Share on other sites More sharing options...
The UnUsual Suspect Posted November 7, 2014 Share Posted November 7, 2014 The most common cause is you have a firewall or other security software blocking incoming connections, you have one or more routers that haven't been configured to direct traffic on this port to your computer. Link to comment Share on other sites More sharing options...
OmarAsmal Posted November 7, 2014 Author Share Posted November 7, 2014 how do i add this port to the router? Link to comment Share on other sites More sharing options...
The UnUsual Suspect Posted November 7, 2014 Share Posted November 7, 2014 You have to consult your routers documentation, this is not a bitcomet issue, however if the router was using upnp and it was functioning properly this wouldn't be necessary so you may have to do it manually, or you may have a second router. Also you didn't mention what type of internet connection you have or what type of modem, the problem could be there also. We have some good info on setting up routers at wiki.bitcomet.com and you may also find a guide for your router at portforward.com. Link to comment Share on other sites More sharing options...
OmarAsmal Posted November 8, 2014 Author Share Posted November 8, 2014 Tried manually doing it and still same result its still blocked. I give up can't seem to get it to work... Link to comment Share on other sites More sharing options...
The UnUsual Suspect Posted November 8, 2014 Share Posted November 8, 2014 Also you didn't mention what type of internet connection you have or what type of modem, the problem could be there also. Is there any reason you've resisted providing this info? Link to comment Share on other sites More sharing options...
OmarAsmal Posted November 8, 2014 Author Share Posted November 8, 2014 (edited) I think it is a 2 meg DSL line(South Africa) but i have a router and i did mention the name. Sorry about that i'm new to this so making a lot of mistakes as you have noticed. Edited November 8, 2014 by OmarAsmal (see edit history) Link to comment Share on other sites More sharing options...
The UnUsual Suspect Posted November 9, 2014 Share Posted November 9, 2014 If you have dsl there is also a modem which may also have a router in it. Check the article on cascaded routers on wiki.bitcomet.com, it should be helpful in determining what you have and what you need to do. One simple check you can do is look at the WAN ip address on your router, it should be similar to 41:162:29:xx, if it's not you most likely have a second router. If your router plugs into any sort of telephone device other than a jack in the wall, then it is probably a router. Link to comment Share on other sites More sharing options...
OmarAsmal Posted November 9, 2014 Author Share Posted November 9, 2014 My internet goes straight to a wall jack. This is the message by the yellow light i get Link to comment Share on other sites More sharing options...
OmarAsmal Posted November 9, 2014 Author Share Posted November 9, 2014 Using portforwarder app gives me this. Guessing that means i have 2 routers? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now