Just Downloaded BitComet! help required

[big_aman]

Hi all,

I have just downloaded Bitcomet. I could not understand the help files. As of now, its showing DHT not connected. I am using windows firewall in which the Bitcomet applications have been allowed through exceptions. My internet connection is Wireless, so i am not sure about the ip being static or dynamic. Does it matter?

which port should I be using for this software. How do i make sure my UDP ports are correct.

this is the log that i got while downloading a torrent file.

Default tracker optimization rules file loaded.

IP rules file: ipfilter.dat loaded, 0 entries.

Start Listening at TCP Port:18760

Start Listening at UDP Port:18760

BitComet 0.70 is running on:

CPU : Intel® Pentium® M processor 1.50GHz 598 MHz

RAM size : 246.42 MB

OS Version: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)

Windows XP ICF Status: Firewall TCP port is opened.[wireless LAN]

Windows XP ICF Status: Firewall UDP port is opened.[wireless LAN]

Windows XP WF Status: TCP Port is opened in Windows Firewall.

Windows XP WF Status: UDP Port is opened in Windows Firewall.

Update Local IP: 192.168.0.102

Windows XP ICS Status: cannot find working ICS.

Windows XP UPnP Status: Found WANConnectionDevice1 [Linksys] [http://www.linksys.com/]

Windows XP UPnP Status: Found Service: urn:schemas-upnp-org:service:WANEthernetLinkConfig:1

Windows XP UPnP Status: Error occur when Adding TCP Port Mapping!

Windows XP UPnP Status: Error occur when Adding UDP Port Mapping!

Windows XP UPnP Status: Found Service: WANIPConnection

Windows XP UPnP Status: WAN IP: 192.168.1.2

Windows XP UPnP Status: TCP Port Mapping Existed!

Windows XP UPnP Status: Error occur when Adding UDP Port Mapping!

Favourite sites file version checking . . . . up-to-dated now.

Stop Listening at Port:18760

Start Listening at TCP Port:14561

Start Listening at UDP Port:14561

Stop Listening at Port:14561

Start Listening at TCP Port:14641

Start Listening at UDP Port:14641

Please help!!!!!!

thanks

[The UnUsual Suspect]

If you want your bit torrent downloads to function correctly on your wireless lan, you will need to setup port forwarding on your router, and you should also set a static ip address in windows, if you don't do this, you could have to change your router settings when you reboot your computer.

Here is an excellant source for guides in setting up your router...

http://portforward.com/

Their guides have graphics and will walk you through the whole process for your make and model of router.

They also have a guide for setting your static ip address in windows.

Suspect

[big_aman]

thanks

will go through the documents and hopefully i would start !! :-)

[Dark_Shroud]

Please don't post the same thing. I deleted your other post of this. Now here is a slightly edited version of what I posted to you before I deleted those psots.

A few more things, for starters turn off UPnP & IP Filter.